iamrick9211
Member
An air source heat pump (ASHP) like the T3 operates by extracting heat from the surrounding air and transferring it into your pool water. Unlike conventional heaters that generate heat by burning fuel or using electrical resistance, the T3 uses ambient air as its heat source, which makes it far more energy-efficient.
The process begins with the T3's outdoor unit drawing in ambient air through a fan. This air passes over an evaporator coil filled with refrigerant, which absorbs the heat and turns into a gas. The gas is then compressed by a compressor, which increases its temperature significantly. This hot gas flows through a heat exchanger where it transfers heat to the pool water circulating through the system. The refrigerant cools down and returns to a liquid state, ready to repeat the cycle.
For more details about T3 Swimming Pool Air Source Heat Pump, visit here.
The process begins with the T3's outdoor unit drawing in ambient air through a fan. This air passes over an evaporator coil filled with refrigerant, which absorbs the heat and turns into a gas. The gas is then compressed by a compressor, which increases its temperature significantly. This hot gas flows through a heat exchanger where it transfers heat to the pool water circulating through the system. The refrigerant cools down and returns to a liquid state, ready to repeat the cycle.
For more details about T3 Swimming Pool Air Source Heat Pump, visit here.